Draper 71095 MW170T 230V Gas/Gasless Turbo MIG Welder (160A)
SKU: DRA71095
£173.05
Inc VAT
£144.21
Ex VAT
Inc VAT
Zero-rated for VAT
Ex VAT
Was
Inc VAT
Multi-purpose machine featuring continuous welding current and thermal overload protection
Order within
Free click & collect
Usually ready within an hour if ordered by 3:30pm, Monday to Friday
Barcode
5010559710959
Description / Draper 71095
Multi-purpose machine featuring continuous welding current and thermal overload protection.
Supplied with 1.5M earth clamp, 2.5M welding torch, welding brush, welding mask and a 1kg spool of solid core welding wire.
For use with either gas or gasless MIG wire of up to 15kg spool sizes.
Gas bottle, regulator, MIG wire, etc are all available separately (examples listed under Related Products).
Note: For a successful weld joint, the molten metal must be protected from contaminating gases found in the air. This is either achieved by supplying the torch with gas from a bottle or setting the machine up for no-gas and using a flux cored filler wire. The shield is produced as the flux in the wire melts. To connect a gas bottle to the welder, you may need a suitable regulator such as Draper Stock No.44352, or similar.
Supplied with 1.5M earth clamp, 2.5M welding torch, welding brush, welding mask and a 1kg spool of solid core welding wire.
For use with either gas or gasless MIG wire of up to 15kg spool sizes.
Gas bottle, regulator, MIG wire, etc are all available separately (examples listed under Related Products).
Note: For a successful weld joint, the molten metal must be protected from contaminating gases found in the air. This is either achieved by supplying the torch with gas from a bottle or setting the machine up for no-gas and using a flux cored filler wire. The shield is produced as the flux in the wire melts. To connect a gas bottle to the welder, you may need a suitable regulator such as Draper Stock No.44352, or similar.
Features / Specification
| Phase | Single |
|---|---|
| Input current | 16A |
| Power factor | 0.9 |
| Output amperage range | 60 - 160A |
| Absorbed current | 5.2KVA |
| Duty cycle | 10% @ 160A |
| Welding wire size | 0.6 - 0.9mm |
| No load voltage | 34V |
| Dimensions | 640 x 385 x 435mm |
| Weight | 32kg |