Fischer 41900 Injection Anchor Sleeve FIS H 12 x 50 K Plastic Pack x 50

• The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry
• The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS GREEN, FIS P Plus, and FIS P can be used with it.
• The optimised grating structure reduces the use of injection mortar
• When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick
• This directs the load into the building material
• Setting takes place in a pre-positioned installation
• You can use the injection anchor sleeve to bridge non-load-bearing layers
• The approvals of the various injection mortars must be observed

Top Features

• Lattice structure of anchor sleeves lowers mortar consumption
• Anchor sleeve allows for optimum mechanical interlock in perforated brick
• The centring blades fix anchor rods with various diameters
• This lowers complexity and simplifies storage
• Barbed hook: no falling with overhead installations
• ETA approval

Advantages

• The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V, FIS GREEN and FIS P Plus, and ensures sparing mortar use with the best interlock
• The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters
• The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation
• The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation

Functioning

• The system can be used with any of the following injection mortars: FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS GREEN or FIS P Plus. FIS P can be used but does not have approvals
• The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E
• The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base
• Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly
• The load is borne by the interlock.

Load Table for Downloading

https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_lomau_f_%23sen_%23aip_%23v1.pdf

Approval Documents for Downloading

https://content.fischer.de/cbfiles/fischer/zulassungen/eta/zd_etab_f_10-0383_%23sen_%23aip_%23v1.pdf https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_fis-v-mauer-1_f_%23sen_%23aip_%23v1.pdf