- Description
-
Details
This Makita 18v LXT 4 Piece Kit contains the DHP489 Brushless Combi Drill, DGA504 Brushless 125mm Angle Grinder, DHR243 Brushless SDS Drill with Quick change chucks, DTD173 Brushless Impact Driver with 3x 5.0Ah Batteries, Charger in 2x Makpac Type IV Stacking Cases
DHP489: Excellent drilling capacity, LED job light with pre-glow and after-glow function, Robust keyless drill chuck with single metal sleeve, Metal gear housing, Trigger lock function, Reverse switch, Variable speed control by trigger, Mechanical 2-speed, Electric brake
Max in Masonry: 16mm, Max in Steel: 13mm, Max in Wood: 38mm, Chuck Capacity: 1.5 – 13 mm, No Load Speed Hi: 0 – 1,800 rpm, No Load Speed Low: 0 – 550 rpm, Blows per minute Hi: 0 – 27,000 ipm, Blows per minute Low: 0 – 8,250 ipm, Max Torque: 73Nm, Net weight: 1.8Kg
DGA504: Equipped with highly enhanced Brushless DC motor., A built-in controller changes the cutting speed automatically according to load condition, enabling users to obtain high speed rotation on light duty application/ high torque on heavy duty application, Electronic current limiter for overload protection, Soft start, Anti-restart function., Soft grip, Equipped with automatic speed control: - Automatically changes the cutting speed according to load condition for an optimum operation. On light duty high speed rotation mode. On heavy duty high torque mode.
Disc Size: 125mm (5"), No load speed: 8500 rpm
DHR243: The DHR243 achieves higher productivity than model BHR202 by using efficient Brushless DC motor to reduce energy loss by 30% and is able to drill in concrete as fast or faster than 24V Cordless Combination hammers., The tool body is separated into the upper and lower housings at the foot of the handle portion where the housings are jointed with vibration absorbing cushion rubbers., Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact., One touch slide chuck for SDS-plus bit., Easy-to-grip handle ergonomically designed to give maximum power thrust and provide a sure and comfortable grip in any operation including overhead applications, drilling with palm-up or palm-down grip.
No Load Speed: 0-950rpm, Joules: 2.4j, Blows Per Minute: 0-4700 bpm, Max In Concrete: 24mm, Max In Steel: 13mm, Max In Wood: 27mm, Net Weight:3.3Kg
DTD173: Compact Impact driver with brushless motor, 4 modes including tek mode for improved versatility, Mode switch mounted at the rear for ease os use and easy checking of selected mode, Slim body design for a good grip, Anti-bit wobbling structure; Two ball bearings are used to securely hold the anvil for reduced bit wobbling, Electric brake for maximum productivity and increased operator safety, New ring style LED light gives improved visibilty in low light
Max torque: 180Nm, No load speed: 0-3600 rpm, Impacts per minute: 0-3800 ipm, Net weight: 1.2KgSupplied With:
- 3X 18v - 5.0Ah Li-ion Batteries
- Quick Charger
- Quick Change chucks for DHR243
- SDS Drillbit set
- Screwdriver bit set
- 3X thin cutting discs for metal / inox 125mm
- Diamond Blade 125mm
- Features
Features
Battery type:
Li-ion Battery power: 18v - 5.0Ah
