Makita DLX2537ST 18V LXT Twinkit Combi Drill and Impact Driver with 2x 5.0Ah Batteries and Charger in Carry Case

This DLX2537ST 18V LXT Twinkit contains the DHP490 18V Brushless Combi Drill and DTD153 Brushless Impact Driver with 2x 18V - 5.0Ah Batteries and Standard Charger in a Carry Case
DHP490: This model ensures sufficient torque by adopting a Brushless Motor that is lightweight and compact, easy to handle even in narrow spaces
Max.torque of 65Nm
Mechanical 2 speed
Electric brake
Variable speed control by trigger
Keyless chuck for easy bit installation and removal
Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
Built-in LED light with pre-glow and afterglow functions illuminates the work area
Variable speed trigger allows operator to adjust speed based on materials or application
eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
Battery protection circuit protects against overloading, over-discharging and over-heating
No load speed: 0 - 500 / 1900 min⁻¹, Max. fastening torque Hard/Soft: 50 / 27 Nm, Max Torque: 65 Nm, Impacts per Minute (IPM): 0 - 7500 / 28500 min⁻¹, Max. Drilling Diameter in Wood: 38 mm, Max. Drilling Diameter in Masonry: 13 mm, Max. Drilling Diameter in Steel: 13 mm, Drilling Capacity Wood (Auger Bit): 38 mm, Drilling Capacity Wood (Self-feed bit): 38 mm, Drilling Capacity Flat bit: 40 mm, Drilling Capacity Hole Saw: 51 mm, Drill Chuck Capacity: 1,5 - 13 mm, Net weight: 1.0Kg
DTD153: Electric brake 
Variable speed control by trigger
Forward/reverse rotation
LED job light
Brushless motor
Compact design with overall length of 147mm
Phosphorescent bumper
Ergonomic soft grip
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Battery fuel gauge
Reverse rotation auto stop mode: This mode works only with pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds
Max torque: 170Nm, No load speed: 0-3400 rpm, Impacts per minute: 0-3600 ipm, Net weight: 1.5Kg