Fischer 90292 Threaded Rod FIS A M 20 x 245 gvz Steel Grade 5.8 Pack x 10

Top Features

• The universal solution for various fischer injection mortars
• For a manageable range and simpler storage
• Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars
• Optimum load adaptation due to variable anchorage depths
• This lowers installation and material costs.

Product Description

• The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8.
• The threaded rod is a system component for the various fischer injection mortars
• Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces
• A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system
• The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

Advantages

• The threaded rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB)
• It can be individually selected based on requirements, thus allowing for a wide range of applications
• The wide range of approved threaded rods FIS A from M6 to M30 allows for various applications
• Please refer to the approvals of the injection mortar used.

Functioning

• The threaded rod FIS A is suitable for pre-positioned and push-through installation
• FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base.

Approval Documents For Downloading

https://content.fischer.de/cbfiles/fischer/zulassungen/eta/zd_etab_f_02-0024_%23sen_%23aip_%23v3.pdf

https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_fis-v-beton-1_f_%23sen_%23aip_%23v1.pdf

https://content.fischer.de/cbfiles/fischer/zulassungen/zd_icc_01_fsb_f_%23sall_%23aip_%23v9.pdf