Welcome to Lawson HIS

Fischer 536858 ULTRACUT FBS II 10 x 60 5 US Concrete Screw Pack x 50

Fischer 536858 ULTRACUT FBS II 10 x 60 5 US Concrete Screw Pack x 50
Ex. VAT £47.99 Inc. VAT £57.59

Usually ships within 7 working days

The high-performance concrete screw for absolute installation ease

Description

Details

Top Features

  • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesser
  • The special saw tooth geometry enables fast cutting into the concrete
  • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again
  • The Fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort
  • The special saw tooth geometry enables fast cutting into the concrete
  • Drill hole cleaning is not required for installations in ceilings or floors
  • Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted
  • For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TORX bit
  • The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example

Advantages

  • Maximum flexibility with regard to load and fixture thickness due to up to two approved embedment depths
  • The special saw tooth geometry enables fast cutting into the concrete
  • No drill hole cleaning is required for installation in ceilings or floors, or use of hollow drills with suction
  • The expansion-free anchorage (undercut) ensures really low edge and axial clearances
  • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2
  • Approval-compliant adjustment allows the concrete screw to be undone twice and the fixture to be underlaid or adjusted
  • The national approval allows multiple usage for temporary anchorings (for example, formwork construction).

Functionality

  • The ULTRACUT FBS II is recommended for the push-through installation
  • Drill holes do not need to be cleaned during vertical installation (ceiling and floor)
  • For floor fixings the hole must be drilled 3x drill hole diameter deeper
  • We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal torx drive
  • The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control)

Documents for Downloading

Approvals

https://content.fischer.de/cbfiles/fischer/zulassungen/eta/zd_etab_f_15-0352_%23sen_%23aip_%23v3.pdf

https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_ultracut-fbs-ii-zugzone-1_f_%23sen_%23aip_%23v1.pdf

https://content.fischer.de/cbfiles/fischer/zulassungen/zd_z_01_fbsii_f_%23sen_%23aip_%23v1.pdf

Features

Features

ETA-approval
DIBt-approval
Drill hole diameter d0 10 [mm]
Min. drill hole depth for through fixings h2 70 [mm]
Screw ds x ls 12 x 60 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 55 / 5 [mm]
Screw-in depth with fixture thickness hnom2 / tfix - / - [mm]
Screw-in depth with fixture thickness hnom3 / tfix - / - [mm]
Drive SW 15
Amount 50 Unit(s
Applications
Guard rails
Consoles/Base plates
Metal profiles
Shelving systems
Protection barriers
Results / beam anchors
Temporary anchoring, e.g. of building site equipment
Shuttering props
Building materials
Approved for:
Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
Concrete C12/15
Solid building materials
Masonry with a dense structure
Shipping

Free UK Shipping on all Orders over £100 Inc. VAT

All orders over £100 Including VAT are delivered free within the UK, excluding Highlands & Islands and Northern Ireland. When you place an order with our website the cost of delivery will be automatically calculated in your shopping basket. UK Mainland orders below £100 Inc. VAT are £5.99 Inc. VAT.

Products "with Free Shipping"

Some products which cost less than £100 Inc. VAT have free shipping, the same exclusions on destinations apply as above. If "with Free Shipping" products are in the same basket as products without Free Shipping, then the additional products do not receive Free Shipping, and the order is treated as above.

General Information

All deliveries must be signed for, and will therefore not be left unattended. Deliveries are usually made during normal working hours. If you need to make any special arrangements with us for your delivery please contact us with your order number immediately after placing your order. Deliveries must be checked immediately upon receipt. If any damage is evident, please either sign for the delivery as 'damaged', marking the Carrier's receipt accordingly, or do not accept the delivery. Any damage or missing items must be reported within 24 hours of receipt to the returns department, including photos of the damaged goods where appropriate.

Oversize & Heavy Products

Some heavier, bulkier, or hazardous items may also incur a shipping surcharge, we will inform you of the surcharge before we take payment for your order.

Sameday Despatch

In stock orders that are placed before 3:00pm Monday to Friday are despatched that day for the following working day. Requesting delivery to an address different to the billling address may delay your order from being despatched the same day.

EU & Rest of World

To calculate the cost of shipping an order to you, please put your items in the shopping basket, and then request a shipping quote. The price quoted will be for a single carton of up to 30Kg. If the weight/volume of your order exceeds this, we will contact you before shipping to confirm costs.

VAT

If your country is within the EU and you are VAT registered, please enter your VAT number to get VAT removed. The number provided will be validated against VIES, if the number is invalid VAT will still be collected.