Fischer 510923 High Performance Anchor FH II 10/10 S R With Hexagonal Head Stainless Steel (Pack x 50)

• The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel
• The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall
• The black plastic ring prevents the anchor from rotating and absorbs the torque slippage
• This means that the fixture is pulled towards the anchoring base
• The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete

Advantages

• The international approvals guarantee maximum safety and the best performance
• The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2)
• The low profile of the screw head ensures for a discreet fixing
• The design between the bolt and the sleeve ensures high shear load-bearing capacity
• Thus, fewer fixing points are required
• The optimised geometry intelligently reduces the energy required for assembly
• The approval regulates the use of hollow drills.

Functionality

• The FH II is suitable for push-through installation
• When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall
• The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base
• Available head shapes for flexible design solutions

ETA Certification Document

https://fiproductmedia.azureedge.net/media/Certification%20Documents/ETA%20European%20Technical%20Assessment/fischer/ZD_ETAB_F_07-0025_SEN_AIP_V5.pdf