Welcome to Lawson HIS

Fischer 45687 Stand-Off Installation Thermax 8/100 M6 Pack x 20

Fischer 45687 Stand-Off Installation Thermax 8/100 M6 Pack x 20
Ex. VAT £133.04 Inc. VAT £159.65

Usually ships within 10 working days with Free Shipping

The thermally separated stand-off installation in external thermal insulation composite systems (ETICS)

Description

Details

  • The fischer stand-off insulation system Thermax 8 is a solution for fixing into external walls without a thermal bridge in ETICS
  • The stud screw with the glass-fibre reinforced cone cuts its own way through the plaster into the insulation
  • During mounting, the stud screw is rotated into the universal fixing UX and is therefore secured within the building material
  • The anti-cold cone at the tip of the stud screw creates a thermal barrier and holds the outer fixing
  • The Thermax fixes light loads such as lights, letterboxes, or lightning conductors to concrete, aerated concrete, and masonry from solid and perforated brick

Top Features

  • No thermal bridge due to the anti-cold cone
  • Installation without setting tool. This saves time
  • Self-milling plastic cone
  • Exact alignment of the attachment without pressure marks and damage to the ETICS
  • Suitable for all building materials

Advantages

  • The stand-off installation allows for the fixture to be adjusted to the exact position required, which avoids pressure marks and damage to the ETICS
  • The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing
  • The glass-fibre-reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools
  • Combining Thermax 8 with the universal plug UX provides secure anchoring in the substrate
  • Without the UX plug, direct installation in a wooden substrate is possible after pre-drilling, too.

Functionality

  • The Thermax 8 is suitable for pre-positioned installation
  • The self-tapping, glass-fibre-reinforced cone cuts its own way through the plaster into the insulation during installation
  • The anti-cold cone uses a thermal barrier to minimise heat losses
  • Installation does not require any special tools
  • For use in wood without a plug, the wood (see the footnote beneath the load table) and plaster must be pre-drilled: Thermax 8: d0 = 14 mm, h0 = 50 mm.
  • The assortment offers connection possibilities using M6 metric screws, 6.3 mm self-tapping screws, 6.0 mm chipboard screws, and 4.5-5.5 mm chipboard screws if using an SX 5 plug.

 

Load Table for Downloading

https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_thermax-8-10_f_%23sen_%23aip_%23v4.pdf

Insallation Instructions

https://content.fischer.de/cbfiles/fischer/zulassungen/ma_01_thermax_f_%23sen_%23aip_%23v4.pdf

Features

Features

Technical Data
Drill hole diameter d0 10 [mm]
Drill hole depth h0 160 [mm]
Usable length e 80 - 100 [mm]
Anchorage depth hef 60 [mm]
Cover cap-Ø ADK 18 [mm]
Width across nut SW 10 [mm]
Chipboard / metric / sheet metal screw 4,5 - 6,0 / M6 / 6,3
Contents
Amount 20 Unit(s)
GTIN (EAN Code) 4006209456873
Applications
For the thermally separated fixing of:
Signs
Lighting
Letter boxes
Motion detectors
Downpipes
Lightning rods
Blind guide rails
Building materials
Concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid sand-lime brick
Building brick
Aerated concrete
Wood