Fischer 40945 Bolt Anchor FBN II 10/160 Electro Zinc Plated (Pack x 20)

• The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete
• Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner
• The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation
• The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas

Advantages

• The standard anchorage depth achieves the maximum load-bearing capacities
• Thus fewer fixing points and smaller anchor plates are required
• The reduced anchorage depth reduces the drill hole depth
• This minimises the amount of time needed for installation whilst increasing flexibility
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
• Applications Steel constructions Guard rails Consoles Ladders Machines Gates Façades

Functionality

• The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions
• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall
• The head embossing offers a simple control of the anchoring
• In the case of series installation, we recommend using the FABS bolt anchor setting tool

ETA Certification Document

https://fiproductmedia.azureedge.net/media/Certification%20Documents/ETA%20European%20Technical%20Assessment/fischer/ZD_ETAB_F_07-0211-1_SEN_AIP_V1.pdf