Fischer 00645 Injection Anchor Sleeve, 1 m length FIS H 30 x 1000 L Pack x 4

• The fischer injection anchor sleeve, 1 m length FIS H L, is the cost-effective system component for fixings in perforated brick masonry without approval.
• The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS P Plus, FIS P, and FIS GREEN can be used with it
• This cost-saving product is sold by the metre and can be cut to the required length
• This increases flexibility and cost-effectiveness
• The anchor sleeve is placed in the drill hole, cut to the desired length, and filled with injection mortar from the base of the anchor sleeve
• When the threaded rod or internal threaded anchor is installed, the mortar is pressed through the grid structure and creates a form fit with the perforated brick
• This directs the load into the building material

Top Features

• Lattice structure of anchor sleeves lowers mortar consumption
• Flexible length adjustment
• This lowers costs and complexity
• Anchor sleeve allows for optimum mechanical interlock in perforated brick.

Advantages

• The metal anchor sleeve can be cut to the required length and thus allows for a range of usable lengths with just one produce, providing flexibility and cost-effectiveness
• The grating structure of the anchor sleeve allows for uniform distribution of mortar in the drill hole and thus for secure hold

Functioning

• The anchor sleeve is at first cut to the required length
• The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base
• Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly
• The load is borne by the interlock

Load Table for Downloading

https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_lomau_f_%23sen_%23aip_%23v1.pdf