Draper 71093 MW230T 230/400V Gas/Gasless Turbo MIG Welder (220A)

For use with either gas or gasless MIG wire of up to 15kg spool sizes.

Features:
•   Euro torch connector
•   Spot welding timer for precise spot welds
•   Six stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Dinse fit earth clamp
•   0.6/0.8mm wire feed roller
Supplied with wheel kit and reinforced gas bottle support.
Gas bottle, regulator, MIG wire, etc are all available separately (examples listed under Related Products).

Note: For a successful weld joint, the molten metal must be protected from contaminating gases found in the air. This is either achieved by supplying the torch with gas from a bottle or setting the machine up for no-gas and using a flux cored filler wire. The shield is produced as the flux in the wire melts. To connect a gas bottle to the welder, you may need a suitable regulator such as Draper Stock No.44352, or similar.